When a specification says Pending
Some rows on an ANYI product page read Pending rather than carrying a value. That is a statement about our records, not about the valve, and it tells you exactly what to ask for.
Read enough ANYI product pages and you will meet a row that carries no number. The connection line may read Pending. A description line may say that an English description is awaiting confirmation. It is tempting to read these as small failures of the website, and to assume the real figure exists somewhere just out of sight. It is more useful to read them literally.
A Pending row means that the factory record holds something we have not yet confirmed well enough to publish as a specification. Sometimes the original entry is in Chinese and has not been through a checked translation. Sometimes a connection is recorded as a raw designation whose orientation nobody has verified. The value is not missing from the world; it is missing from the set of things we are willing to state as fact.
Why we leave the row visible
The alternative would be to fill the row with something plausible. A supplier who does that produces a page that reads better and answers worse. You would have no way of telling which figures had been checked and which had been reconstructed, and neither would we six months later when you asked us to confirm one.
So the rule ANYI works to is simple: a published specification is a value someone has confirmed against the factory record. Everything else is marked as awaiting confirmation and stays that way until it is confirmed. A page with four solid lines and one Pending row is more useful than a page with five lines of uneven provenance.
What a Pending row tells you
- It is about the record, not the valveA Pending row does not mean the valve lacks the feature, and it does not mean the feature is unavailable. It means our record of it is not confirmed.
- It is model-specificConfirmation is done per exact model. A value confirmed for one member of a family says nothing about another member.
- It can be resolved for your enquiryMost Pending rows can be confirmed with the factory when a real requirement is attached to them. That is a normal part of a quotation, not an obstacle.
- It should never be quoted as a specificationIf you are building a comparison table, carry the row across as unconfirmed rather than dropping it or guessing it.
Why connections are the usual case
The most common Pending rows are connection-related, and there is a reason for that. A cylinder valve carries two connection designations: one where it meets the cylinder and one where the downstream equipment meets it. The factory record often holds both as raw designations, and a raw designation does not always carry its orientation. Whether a thread is internal or external, and which of the two designations belongs to which end, is exactly the kind of detail that is cheap to confirm and expensive to assume.
So when you see a Pending connection row, the productive next message is not "is this a mistake?" but "please confirm the cylinder-end and outlet designations for this exact model, with orientation." That question has a short answer.
Common questions
Does Pending mean the model is not available?
No. Availability is a commercial question and is answered separately. Pending is only a statement about a value in our published record.
Can I use the value from a similar model in the same family?
Not as a specification. A family groups valves of a general form; working pressure, bore and connections are recorded per exact model.
How long does confirmation take?
It depends on the field and the model. Send the exact designation and the field you need, and we will tell you what the record holds and what has to be checked.
Will the page be updated once it is confirmed?
Yes. A value that is confirmed is published in the unit the factory recorded, and the Pending marker is removed.
Send the exact model designation and the row you need confirmed. We will tell you what the factory record holds rather than filling the gap for you.